Smart charge controller for electric vehicles

The Smart EVSE can dynamically adjust the maximum power the Electric Vehicle will charge with. It supports a charging socket with locking actuator, or fixed charge cable. Up to four SmartEVSE's can be connected together to allow for load balancing between charging stations.

Stroom Transformator (100A) voor gebruik met de Sensorbox

This residual current monitor will detect DC and AC residual currents in 50Hz/60Hz AC installations.
It's primarily intended for use in Electric Vehicle charging stations to disconnect the supply to the Electric Vehicle under a DC residual fault current condition.

The Smart EVSE Sensorbox will actively measure the Mains current for up to three phases, and sends this data to the Smart EVSE controller.

De Sensorbox v2 meet de stroom (en stroomrichting) per fase, en geeft dit door aan de SmartEVSE controller.